GS 300 L6-3.0L (2JZ-GE) (1993)
/Page-813001.png)
EGR Temperature Sensor: Service and Repair
PROCEDURE
Removal
1. Disconnect the Exhaust Gas Recirculation Tempertaure Sensor connector.
2. Remove the Exhaust Gas Recirculation Tempertaure Sensor.
Installation
1. Install the Exhaust Gas Recirculation Tempertaure Sensor.
Torque: 20 Nm (14 ft lb)
2. Connect the Exhaust Gas Recirculation Tempertaure Sensor connector.
