GS 300 L6-3.0L (2JZ-GE) (1993)
-
Remove Exhaust Gas Recirculation Valve mounting nuts.
-
Remove Valve and gaskets.
Installation
1. Reinstall the Exhaust Gas Recirculation Valve.
-
Place a new gasket on the intake air connector.
-
Install the Exhaust Gas Recirculation Valve wiyh two nuts.
Torque: 18 Nm (13 ft lb)
-
Reconnect vacuum hose and pressure hose to Valve.
2. Reinstall the Exhaust Gas Recirculation Temperature Sensor (California models only).
Torque: 20 Nm (14 ft lb)
3. Reinstall the Exhaust Gas Recirculation Pipe.
-
Temporarily install the union nut of the Exhaust Gas Recirculation Pipe.