GS 300 L6-3.0L (2JZ-GE) (1993)
-
Loosen the union nut of the Exhaust Gas Recirculation pipe.
-
Remove the 2 bolts, Exhaust Gas Recirculation pipe and gasket.
6. Disconnect Exhaust Gas Recirculation Gas Temperature Sensor connector (California only).
7. Disconnect Throttle Body bracket from Throttle Body and cylinder head. Remove the 4 nuts, and disconnect the Throttle Body bracket from the
Throttle Body and cylinder head.
8. Remove Throttle Body with intake air connector.
-
Disconnect the following hoses:
Positive Crankcase Ventilation hose from intake air connector (1).
3 vacuum hoses from No.2 vacuum pipe (2).
-
Disconnect the following connectors:
Sub-Throttle Actuator connector (w/TRAC only) (1).
Sub-Throttle Position Sensor connector (w/ TRAC) (2).
Idle Air Control Valve connector (3).
Throttle Position Sensor connector (4).
Vacuum Switching Valve for Exhaust Gas Recirculation connector (5).