GS 300 L6-3.0L (2JZ-GE) (1993)
-
Remove the 2 nuts and disconnect the No.2 vacuum pipe.
-
Remove the union bolt and 2 gaskets, and disconnect the fuel pipe.
NOTE: Put a suitable container or shop rag under the delivery pipe. Slowly loosen the union bolt.
10. Disconnect No.2 fuel pipe from Fuel Pressure Regulator.
-
Remove the bolt holding the fuel pipe to the intake manifold.
-
Remove the union bolt and 2 gaskets, and disconnect the fuel pipe from the Pressure Regulator.
NOTE: Put a suitable container or shop rag under the Pressure Regulator. Slowly loosen the union bolt.
11. Remove air intake chamber stays. Remove the bolt, nut and intake chamber stay. Remove the No.1 and No.2 stays.
12. Disconnect vacuum sensing hose from Pressure Regulator.
13. Disconnect Injector connectors.