GS 300 L6-3.0L (2JZ-GE) (1993)
-
Install the nut holding the Vacuum Switching Valve to the chamber stay.
-
Connect the following connectors:
Sub-Throttle Actuator connector (w/TRAC) (1).
Sub-Throttle Position Sensor connector (w/ TRAC) (2).
Idle Air Control Valve connector (3).
Throttle Position Sensor connector (4).
Vacuum Switching Valve for Exhaust Gas Recirculation connector (5).
-
Connect the following hoses:
Positive Crankcase Ventilation hose to intake air connector (1).
3 vacuum hoses to No. 2 vacuum pipe (2).
9. Install Throttle Body bracket with the 4 nuts.
Torque: 21 Nm (15 ft lb)
10. Connect Exhaust Gas Recirculation Gas Temperature Sensor connector (California only).