GS 300 L6-3.0L (2JZ-GE) (1993)
Fuel Rail: Service and Repair
Removal
PROCEDURE
CAUTION: After affecting any repair that requires disassembly of fuel related components, inspect carefully for fuel leaks upon completion.
1. Disconnect cable from negative terminal of battery.
CAUTION: Turn the ignition switch to "LOCK". Disconnect the cable from the negative (-) terminal of the battery. Wait 90 seconds before
proceeding with work.
2. Drain engine coolant.
3. Disconnect the following control cables from throttle body.
-
Accelerator cable.
-
A/T throttle control cable.
-
Cruise control actuator cable.
4. Remove intake air connector pipe.
-
Disconnect the following hoses:
PS air hose from air connector pipe (1).
Positive Crankcase Ventilation hose from No.2 cylinder head cover (2).
-
Loosen the 2 hose clamps. and remove the air connector pipe with the hoses.
5. Remove Exhaust Gas Recirculation pipe.