GS 300 L6-3.0L (2JZ-GE) (1993)
14. Disconnect actuator for Acoustic Control Induction System.
-
Remove the 2 bolts and disconnect the actuator.
-
Wrap the Actuator with adhesive tape and attach it to the intake chamber.
NOTE: Do not apply any force on the actuator rod. Prevent the rod clip from detaching.
15. Remove delivery pipe and Injectors.
-
Remove the 3 bolts and delivery pipe together with the 6 Injectors.
NOTE: Be careful not to drop the Injectors when removing the delivery pipe.
-
Pull out the 6 Injectors from the delivery pipe.
-
Remove the O-ring(s) and grommet(s) from each Injector.
-
Remove the 6 insulators (Except Calififornia) and 3 spacers from the intake manifold.