GS 300 L6-3.0L (2JZ-GE) (1993)
2. Install the actuator for Acoustic Control Induction System with the 2 bolts.
Torque: 6.8 Nm (61 in lb)
3. Connect Injector connectors.
NOTE: The No. 1, No. 3 and No. 5 Injector connectors are dark gray, and the No. 2, No. 4 and No. 6 Injector connectors are gray.
4. Connect vacuum sensing hose.
5. Install air intake chamber stays with the bolt and nut. Install the No. 1 and No. 2 stays. The No. 1 stay is marked with "F" and No. 2 stay is marked
with "R".
Torque: 18 Nm (13 ft lb)
6. Connect no. 2 fuel pipe to Fuel Pressure Regulator with 2 new gaskets and the union bolt.
Torque: 27 Nm (20 ft lb)
-
Install the bolt holding the fuel pipe to the intake manifold.