GS 300 L6-3.0L (2JZ-GE) (1993)
Air Flow Meter/Sensor: Service and Repair
PROCEDURE
Removal
1. Disconnect cable from negative terminal of battery.
CAUTION: Turn the ignition switch to "LOCK". Disconnect the cable from the negative (-) terminal of the battery. Wait 90 seconds before
proceeding with work.
2. Remove air cleaner hose.
-
Disconnect the power steering air hose to the air cleaner hose.
-
Loosen the 2 hose clamps, and remove the air cleaner hose.
3. Remove Volume Air Flow Meter from air cleaner.
-
Disconnect the high - tension cord from the cord clamp.
-
Disconnect the Volume Air Flow Meter connector.
-
Disconnect the wire clamp from the bracket.
-
Remove the 4 nuts, bolt, Volume Air Flow Meter and gasket.