GS 300 L6-3.0L (2JZ-GE) (1993)
2. Set No. 1 cylinder to TDC compression. Verify that the timing marks of the camshaft timing pulleys and No 4 timing belt cover are aligned.
3. Install a new Distributor o-ring and coat lightly with oil. Install Distributor.
-
Align the marks of the drive gear and Distributor housing.
-
Insert the Distributor, aligning the protrusion of the flange with that of the stud bolt on the cylinder head.
-
Temporarily secure with the hold down nut.
4. Using a 5 mm hexagon wrench, reinstall the No. 3 timing belt cover with the 6 bolts. Reinstall the oil filler cap.
5. Adjust ignition timing. See Adjustments. See: Ignition System/Ignition Timing