GS 300 L6-3.0L (2JZ-GE) (1993)
Ignition Cable: Service and Repair
Assembly
PROCEDURE
1. Install high-tension cords.
-
Connect the high-tension cords to the Spark Plugs. Face the cord of the high - tension cord as shown in the illustration.
-
Fit the high-tension cord by pushing the center and its outer ring.
-
Connect the high-tension cords to the Distributor and Ignition Coil. Align the spline of the Distributor or Ignition Coil with the spline groove
of the holder.
-
Push in the holder together with the grommet until the claw of the holder locks securely.