GS 300 L6-3.0L (2JZ-GE) (1993)
Air Bag: Technical Service Bulletins
Passenger Airbag - Replacement Procedure
ELECTRICAL
EL95-001
FEBRUARY 3, 1995
ES 300, GS 300
When replacing the passenger airbag door or airbag assembly on ES 300 or GS 300, make sure to replace both parts as a set. To simplify this procedure,
the front passenger airbag parts for these models are now packaged as a set (set contains the airbag door, airbag assembly and associated rivets, bolts
and/or nuts).
Caution:
Replace the front passenger airbag door and airbag assembly as a set, never separately. INSTALLATION PRECAUTIONS:
TAKE THE FOLLOWING PRECAUTIONS WHEN REPLACING THESE PARTS:
^
When installing the airbag door, always replace the bolts, nuts, and screws.
^
Do not store the front passenger airbag assembly with the airbag door facing down.
^
Never disassemble the front passenger airbag assembly.
^
Make sure the airbag door does not have scratches, cracks, peeling or deformation.
^
When installing the airbag door, do not let any foreign particles get into the airbag assembly.
^
When installing the airbag door, do not pinch or otherwise damage the airbag assembly.
See the repair manual for the airbag installation and handling instructions.
INSTALLATION INSTRUCTIONS:
The airbag door and airbag assembly must be assembled before it is installed onto the vehicle.
ES 300