GS 300 L6-3.0L (2JZ-GE) (1993)
Knock Sensor: Service and Repair
PROCEDURE
Removal
1. Remove power steering pump rear stay.
2. Remove Knock Sensors.
-
Disconnect the knock sensor connector.
-
Using Special Service Tool, remove the Knock Sensor (SST 09816-30010).
Installation
1. Reinstall Knock Sensors using Special Service Tool (SST 09816-30010).
Torque: 44 Nm (33 ft lb)
Connect the knock sensor connector.
2. Reinstall power steering pump rear stay.
Torque: 39 Nm (29 ft lb)