GS 300 L6-3.0L (2JZ-GE) (1993)
/Page-1227001.png)
Starter Relay: Testing and Inspection
Fig. 12 Starter Relay Inspection.
1.
Using a suitable ohmmeter, check relay continuity as follows:
a. Ensure continuity exists between terminals 1 and 2, Fig. 12.
b. Ensure continuity does not exist between terminals 3 and 5.
c. Apply battery voltage across terminals 1 and 2.
d. Ensure continuity exists between terminals 3 and 5.
