GS 300 L6-3.0L (2JZ-GE) (1993)
/Page-1090002.png)
6. Fully apply the parking brake and chock the four wheels.
7. Start the engine and check idling rpm.
8. Keep your left foot pressed firmly on the brake pedal and shift into D range.
9. Measure the accumulator back pressure.
10. With the conditions the same as in (h), ground the other probe or the test lead which has one end inserted into the terminal SLN of the ECM
harness side connector, then measure the accumulator back pressure.
SPECIFIED ACCUMULATOR BACK PRESSURE (D range, Idling)
EVALUATION
