GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-1796001.png)
Collision Avoidance Warning Indicator: Testing and Inspection
ON-VEHICLE INSPECTION
1. INSPECT NO. 1 CLEARANCE WARNING BUZZER
a. Connect the intelligent tester to the DLC3.
b. Turn the engine switch on (IG).
c. Turn the intelligent tester ON.
d. Turn the clearance sonar main switch ON.
e. Select the item "FRONT BUZZER" in the Active Test, and perform it using the intelligent tester.
f.
Check that the No. 1 clearance warning buzzer sounds when the Active Test is carried out.
OK: No. 1 clearance warning buzzer sounds.
