GS 300 RWD V6-3.0L (3GR-FSE) (2006)
d. Attach the clip and 2 claws to install the switch.
e. Install the screw.
3. INSTALL STEERING WHEEL PAD
4. INSTALL NO. 2 STEERING WHEEL COVER LOWER
5. INSTALL NO. 3 STEERING WHEEL COVER LOWER
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
8. CHECK SRS WARNING LIGHT
a. Check SRS warning light.