GS 300 RWD V6-3.0L (3GR-FSE) (2006)
Fuel Door Release Actuator: Service and Repair
FUEL LID OPENER MOTOR ASSEMBLY
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
3. REMOVE TOOL BOX
4. REMOVE LUGGAGE COMPARTMENT NO. 1 TRIM HOOK
a. Remove the 4 bolts and 4 hooks.
5. REMOVE REAR FLOOR FINISH PLATE
a. Remove the 3 clips labeled A.
b. Detach the 4 clips to remove the finish plate.
6. REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT
a. Detach the hook.
b. Remove the rope hook.