GS 300 RWD V6-3.0L (3GR-FSE) (2006)
Console: Service and Repair
Removal & Installation
REAR CONSOLE BOX
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
a. Using a screwdriver, detach the claws and remove the garnish.
HINT: Tape the screwdriver tip before use.
3. REMOVE CONSOLE UPPER PANEL ASSEMBLY
a. Twist the shift lever knob in the direction indicated by the arrow and remove it.
b. Using a screwdriver, detach the 9 clips.
HINT: Tape the screwdriver tip before use.
c. Remove the ash receptacle and then disconnect the connector.
4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH