GS 300 RWD V6-3.0L (3GR-FSE) (2006)
a. Using a screwdriver, detach the 4 clips.
HINT: Tape the screwdriver tip before use.
b. Remove the console box plate and then disconnect the connector.
7. REMOVE CONSOLE BOX REGISTER ASSEMBLY
a. Using a screwdriver, detach the 4 clips and remove the register.
HINT: Tape the screwdriver tip before use.
8. REMOVE CONSOLE BOX
a. Remove the 4 bolts and 2 screws.
b. Remove the console box and then disconnect the connector.
INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart.
1. INSTALL CONSOLE BOX
a. Connect the connector.
b. Install the console box with the 4 bolts and 2 screws.
2. INSTALL CONSOLE BOX REGISTER ASSEMBLY