GS 300 RWD V6-3.0L (3GR-FSE) (2006)
3. REMOVE SEAT MEMORY SWITCH LH
a. Disconnect the connector.
b. Remove the 2 screws and memory switch.
INSTALLATION
HINT:
-
Use the same procedures for the RH and LH side.
-
A bolt without a torque specification is shown in the standard bolt chart.
1. INSTALL SEAT MEMORY SWITCH
a. Install the switch with the 2 screws.
b. Connect the connector.
2. INSTALL FRONT DOOR TRIM COVER LH
a. Connect the 2 cables to the inside handle.
b. Attach the 9 clips and install the trim cover.