GS 300 RWD V6-3.0L (3GR-FSE) (2006)
Power Seat Switch: Service and Repair
REMOVAL
HINT: Use the same procedures for the LH and RH side.
1. REMOVE FRONT SEAT OUTER BELT ASSEMBLY
a. Using a screwdriver, detach the 2 claws and remove the front seat belt cover.
HINT: Tape the screwdriver tip before use.
b. Apply protective tape around the seat belt anchor cover cap to the cushion shield.
c. Using a screwdriver, detach the 2 claws and remove the seat belt anchor cover cap.
HINT: Tape the screwdriver tip before use.
d. Move the seat using the power seat switch knob so that the belt anchor bolt is revealed.
e. Remove the bolt and front seat outer belt anchor.