GS 300 RWD V6-3.0L (3GR-FSE) (2006)
c. Use tags or make a memo to identify the places to reconnect.
d. Using SST, disconnect the brake No.1 and No.2 tube.
NOTICE: Do not damage the brake No.1 and No.2 tube.
e. Release the lock lever and disconnect the actuator connector.
f.
Remove the 2 bolts, nut and brake actuator assembly with bracket.
NOTICE: Do not damage the brake tubes.
DISASSEMBLY
1. REMOVE BRAKE ACTUATOR ASSEMBLY
a. Remove the 2 nuts and brake actuator assembly from the actuator bracket.
REASSEMBLY
1. INSTALL BRAKE ACTUATOR ASSEMBLY