GS 300 RWD V6-3.0L (3GR-FSE) (2006)
Brake Pedal Assy: Adjustments
BRAKE PEDAL
ADJUSTMENT
1. INSPECT AND ADJUST BRAKE PEDAL HEIGHT
a. Check the brake pedal height.
Pedal height from tibia pad (for 2WD): 120.5 to 130.5 mm (4.744 to 5.138 inch)
Pedal height from tibia pad (for 4WD): 117.1 to 127.1 mm (4.610 to 5.004 inch)
b. Adjust brake pedal height.
(1) Disconnect the connector from the stop light switch assembly.
(2) Remove the stop light switch lock nut. Turn the switch in order to give the pedal some free play
(3) for VSC: Remove the brake booster assembly
(4) for ECB: Remove brake master cylinder with simulator assembly
(5) for VSC: Loosen the push rod lock nut, turn the push rod clevis and adjust length A shown in the illustration.
Length A: 146.2 to 147.2 mm (5.756 to 5.795 inch)
(6) for ECB: Loosen the push rod lock nut, turn the push rod clevis and adjust length A shown in the illustration.
Length A: 147.5 to 148.5 mm (5.807 to 5.846 inch lbs.)
(8) for VSC: Install the brake booster assembly
(9) for ECB: Install brake master cylinder with simulator assembly