GS 300 RWD V6-3.0L (3GR-FSE) (2006)
1. REMOVE FRONT WHEEL
2. DRAIN BRAKE FLUID
3. REMOVE FRONT BRAKE FLEXIBLE HOSE
a. Remove the brake tube with a SST while holding the front brake flexible hose with a wrench.
SST 09023-00101
NOTICE:
^
Do not bend or damage the brake tube.
^
Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting points.
b. Remove the clip.
c. Remove the union bolt, the front brake flexible hose and gasket.
INSTALLATION
1. INSTALL FRONT BRAKE FLEXIBLE HOSE
a. Connect the front brake flexible hose with the union bolt and a new gasket.
Torque: 3GR-FSE 30 Nm (306 kgf-cm, 22 ft. lbs.)
NOTICE: Install the flexible hose lock securely in the lock hole in the disc brake cylinder assembly front