GS 300 RWD V6-3.0L (3GR-FSE) (2006)
b. Connect the brake tube to front brake flexible hose with a SST while holding flexible hose with a wrench.
SST 09023-00101
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
NOTICE:
^
Do not bend or damage the brake tube
^
Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting points.
c. Install the front brake flexible hose with a new clip.
NOTICE:
^
When installing the front brake flexible hose, face the identification mark to the outside of the vehicle and minimize twisting of the hose.
^
Install the clip as it will go.
^
Pay attention to the color of the identification mark (RH: white/white, LH: white/blue) because the front brake flexible hose is different
between right and left (4WD vehicle).
2. DISABLE BRAKE CONTROL (w/ECB)
3. ADD RESERVOIR WITH BRAKE FLUID (w/VSC)
4. ADD RESERVOIR WITH BRAKE FLUID (w/ECB)
5. BLEED BRAKE LINE (w/VSC)
6. BLEED FRONT BRAKE SYSTEMS (w/ECB)
7. BLEED REAR BRAKE SYSTEM (w/ECB)
8. INSPECT FLUID LEVEL IN RESERVOIR (w/VSC)
9. CHECK BRAKE FLUID LEVEL (w/ECB)
10. CHECK AND CLEAR DTC (w/VSC)
11. CHECK AND CLEAR DTC (w/ECB)
12. INSPECT BRAKE FLUID LEAKAGE
13. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)