GS 300 RWD V6-3.0L (3GR-FSE) (2006)
Components
ON-VEHICLE INSPECTION
1. INSPECT BRAKE ACTUATOR ASSEMBLY OPERATION
a. Pre-check preparation
(1) Move the shift lever to the P position. Apply the parking brake and connect the intelligent tester to the DLC3.
(2) Turn the engine switch on (IG).
(3) Turn on the intelligent tester. Select WAS CYL PRS1, WAS CYL PRS2, FR PRESS SENS, FL PRESS SENS and RL PRESS SENS
b. Check FR system solenoid (SLA**, SLR**, SMC1, SMC2)
(1) Select SLAFR CUR. -> Enter and check the output voltage.