GS 300 RWD V6-3.0L (3GR-FSE) (2006)
a. Install the actuator assembly to the actuator bracket with the 2 nuts.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
NOTICE: Do not remove the hole plug before connecting the brake tube because a new brake actuator assembly is filled with brake fluid.
INSTALLATION
1. INSTALL BRAKE ACTUATOR WITH ACTUATOR BRACKET
a. Install the actuator assembly with bracket to the body with the 2 bolts and nut.
Torque: 19 Nm (195 kgf-cm, 14 ft. lbs.)
NOTICE: Do not damage the brake tubes.
b. Connect the actuator connector.
NOTICE: Make sure that the connector is locked securely.
c. Using SST, connect the brake No.1 and No.2 tube.
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
NOTICE: Do not damage the brake No.1 and No.2 tube.