GS 300 RWD V6-3.0L (3GR-FSE) (2006)
f.
Remove the 2 bolts, nut and actuator assembly from the body with bracket.
NOTICE: Do not damage the brake tubes.
DISASSEMBLY
1. REMOVE ABS AND TRACTION ACTUATOR ASSEMBLY
a. Remove the 2 nuts and the actuator assembly from the actuator bracket assembly
REASSEMBLY
1. INSTALL ABS AND TRACTION ACTUATOR ASSEMBLY
a. Install the actuator assembly to the actuator bracket assembly with the 2 nuts.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
INSTALLATION
1. INSTALL ABS AND TRACTION ACTUATOR ASSEMBLY WITH BRACKET
a. Install the actuator assembly with bracket to the body with the 2 bolts and nut.
Torque: 19 Nm (195 kgf-cm, 14 ft. lbs.)
NOTICE: Do not to damage the brake tubes.
b. Using SST, connect the brake No.3 tube to the flexible hose.
SST 09023-00101
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
c. Install the grommet to the body
NOTICE: Make sure that the grommet is installed correctly.