GS 300 RWD V6-3.0L (3GR-FSE) (2006)
C.
Install the water inlet sub-assembly with thermostat.
Install a NEW gasket and the water inlet with thermostat with the 3 nuts.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
D.
Install the water outlet with the 4 bolts and nut.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
NOTE:
Be careful NOT to allow the 0-ring to get caught between other parts.
E.
Connect the 5 hoses.
2.
If leakage was confirmed in step 5 of the Removal procedure, replace the inlet and/or outlet radiator hose(s) and radiator hose clamps.