GS 300 RWD V6-3.0L (3GR-FSE) (2006)
b. Install the pulley and cover plate with the bolt.
Torque: 43 Nm (438 kgf-cm, 32 ft. lbs.)
3. INSTALL WATER INLET ASSEMBLY
a. Install anew gasket to the water inlet housing.
b. Install a new O-ring to the water outlet pipe.
c. Install the water inlet with the 4 bolts and nut.
Torque: 10 Nm (192 kgf-cm, 7 ft. lbs.)
NOTICE: Be careful not to allow the O-ring to get caught between other parts.
d. Connect the 5 hoses.