GS 300 RWD V6-3.0L (3GR-FSE) (2006)
D.
Crank the engine again, and then check that the engine does NOT start.
E.
Loosen the fuel tank cap to discharge the pressure in the fuel tank completely.
F.
Reconnect the fuel pump connector.
G.
Disconnect the cable from the negative () battery terminal.
7.
Remove the No. 1 inlet air cleaner by removing the bolt and clip.
8.
Disconnect the ventilation hose from the cylinder head.
9.
Remove the air cleaner cap with air cleaner hose.
A.
Disconnect the MAF meter connector.
B.
Disconnect the clamp from the air cleaner.
C.
Disconnect the EVAP VSV.