GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-523025.png)
B.
Move the stopper plate downward to set the lock, and insert a hexagon wrench into the hole of the stopper plate.
C.
Install the No. 1 chain tensioner assembly with the 2 bolts.
Torque: 10 N*m (102 kgf*cm, 7 ft*lbf)
D.
Remove the lock pin of the No. 1 chain tensioner assembly.Check that each timing mark is aligned with the crankshaft at the
TDC/compression.
E.
Turn the crankshaft 2 rotations and double-check that each timing mark is positioned properly.
