GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-523039.png)
34.
Install the V-bank cover sub-assembly. Install the 2 nuts on the front of the cover, and then engage the clip on the rear to install the V-bank cover.
NOTE
^
Be sure to engage the clip securely.
^
Do NOT apply excessive force or hit the cover to engage the clip. This may cause the cover to break.
35.
Install the engine compartment side cover RH with the 2 clips and nut.
36.
Install the engine compartment side cover LH with the 3 clips.
37.
Install the cool air intake duct seal with the 7 clips.
38.
Check throttle body function and throttle control motor operating sounds.
A.
Turn the engine switch ON (IG).
