GS 300 RWD V6-3.0L (3GR-FSE) (2006)
(2)
Uniformly loosen and remove the 8 camshaft bearing cap M6 bolts in the sequence shown in the illustration.
HINT
Keep the camshaft horizontal while loosening the bearing cap bolts.
(3)
Uniformly loosen and remove the 8 camshaft bearing cap M8 bolts in the sequence shown in the illustration.
(4)
Remove the 5 camshaft bearing caps.
31.
Remove the No. 2 camshaft.
A.
Remove the bolt for the No. 2 chain tensioner assembly.
B.
While holding No. 2 camshaft, remove the No. 2 chain tensioner assembly.