GS 300 RWD V6-3.0L (3GR-FSE) (2006)
Torque: Bolts except A: 10 N*m (102 kgf*cm, 7 ft*lbf)
12.
Install the cylinder head cover LH.
A.
Apply FIPG sealant as shown in the illustration.
FIPG sealant: P/N 0882600080 (or equivalent)
NOTE
^
Remove any oil from the contact surface.
^
Install the head cover within 3 minutes after applying the FIPG sealant.
^
Do NOT start the engine for at LEAST 2 hours after installing.
B.
Install 3 NEW gaskets as shown in the illustration.
C.
Install a NEW gasket to the head cover.