GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-529001.png)
Connecting Rod Bearing: Specifications
CONNECTING ROD BEARING
Install and alternately tighten the bolts of the connecting rod cap in several steps.
Torque ....................................................................................................................................................................... 25 Nm (255 kgf-cm, 18 ft. lbs.)
Mark the front side of each connecting cap bolt with paint.
Retighten the cap bolts by 90° as shown in the illustration.
Check the painted mark is now at a 90° angle to the front.
