GS 300 RWD V6-3.0L (3GR-FSE) (2006)
A. Disconnect the No.3 fuel hose from the No.1 fuel pipe.
B. Disconnect the 2 fuel hoses.
C. Remove the 2 bolts and No.1 fuel pipe.
17. Disconnect the No.2 fuel pipe.
A. Disconnect the fuel high pressure side fuel pump connector.
B. Secure the union bolt in place on the fuel pump side with a 21-mm wrench. Using a 19-mm union nut wrench loosen the union and remove the
fuel pipe.
NOTE
^
There must be absolutely NO free play in the union on the fuel pump side.
^
If the union on the fuel pump side has free play, replace the fuel pump.
C. Remove the 2 bolts on the delivery pipe side.