GS 300 RWD V6-3.0L (3GR-FSE) (2006)
22. Remove the cylinder head cover LH.
A. Remove the 12 bolts oil seal washer and cylinder head cover.
^
Cover the hole around the timing chain with shop rags to prevent foreign material from falling into the engine.
^
The baffle plate is located on the back of the portion shown in the illustration.
^
Do NOT damage the baffle plate when removing the cylinder head cover.
B. Remove the cylinder head cover gasket from the cylinder head cover.
C. Remove the 3 gaskets.
23. Remove the cylinder head cover RH.
A. Remove the 12 bolts 2 oil seal washers and cylinder head cover.
^
Cover the hole around the timing chain with shop rags to prevent foreign material from falling into the engine.
^
The baffle plate is located on the back of the portion shown in the illustration.