GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-540016.png)
(2) Uniformly loosen and remove the 8 camshaft bearing cap M6 bolts in the sequence shown in the illustration.
HINT
Keep the camshaft horizontal while loosening the bearing cap bolts.
(3) Uniformly loosen and remove the 8 camshaft bearing cap M8 bolts in the sequence shown in the illustration.
(4) Remove the 5 camshaft bearing caps.
31. Remove the No.2 camshaft.
A. Remove the bolt for the No.2 chain tensioner assembly.
B. While holding No.2 camshaft remove the No.2 chain tensioner assembly.
