GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-540029.png)
B. Install 3 NEW gaskets as shown in the illustration.
C. Install a NEW gasket to the head cover.
D. Install the head cover with the 14 bolts.
Torque:
Bolts A:
21 N*m (214 kgf*cm, 15 ft*lbf)
Torque:
Bolts except A:
10 N*m (102 kgf*cm, 7 ft*lbf)
12. Install the cylinder head cover LH.
A. Apply FIPG sealant as shown in the illustration. FIPG sealant: P/N 08826-00080 (or equivalent)
NOTE
^
Remove any oil from the contact surface.
