GS 300 RWD V6-3.0L (3GR-FSE) (2006)
(1) Check that the camshafts are in the neutral position shown in the illustration.
(2) Uniformly loosen and remove the 9 camshaft bearing cap M6 bolts in the sequence shown in the illustration.
HINT
Keep the camshaft horizontal while loosening the bearing cap bolts.
(3) Uniformly loosen and remove the 9 camshaft bearing cap M8 bolts in the sequence shown in the illustration.
(4) Remove the 6 camshaft bearing caps.
B. LH bank:
(1) Check that the camshafts are in the neutral position shown in the illustration.