GS 300 RWD V6-3.0L (3GR-FSE) (2006)
B.
Install the EVAP VSV to the air cleaner hose. Figure 88.
C.
Connect the MAF meter connector and clamp to the air cleaner.
26.
Connect the ventilation hose from the cylinder head.
27.
Install the No. 1 air cleaner inlet with the bolt and clip.
28.
Connect the cable to the negative (-) battery terminal.
Torque: 5.4 N*m (55 kgf*cm, 48 in*lbf)
29.
Check for fuel leaks.
A.
Connect TIS Techstream to DLC3.
NOTE
Switch OFF all accessories and A/C before connecting the Techstream tester.
B.
Turn the engine switch ON (IG). Do NOT start the engine.