GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-637009.png)
a. Using a plastic-faced hammer, uniformly tap off the baffle.
REASSEMBLY
1. INSTALL TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY
a. Align the baffle with the protruding part of the tailpipe as shown in the illustration.
b. Using a plastic-faced hammer, uniformly tap in the baffle onto the tailpipe.
2. INSTALL EXHAUST PIPE DAMPER
a. Install the support bracket with the 2 bolts.
Torque: 43 Nm (438 kgf-cm, 32 ft. lbs.)
INSTALLATION
1. INSTALL TAIL EXHAUST PIPE ASSEMBLY
a. Install the tail pipe to connect the 6 exhaust pipe supports.
