GS 300 RWD V6-3.0L (3GR-FSE) (2006)
b. Using a 4 mm hexagon wench, remove the 2 hexagon bolts and A/C tube.
c. Remove the 2 O-rings from the A/C tube.
2. REMOVE COOLER EXPANSION VALVE
a. Remove the cooler expansion valve from the cooler evaporator.
3. REMOVE AIR OUTLET CONTROL SERVOMOTOR RH
a. Disconnect the connector.
b. Remove the 3 screws and servomotor.
4. REMOVE AIR MIX CONTROL SERVOMOTOR RH
a. Remove the 3 clamps and connector and disconnect the wire harness.