GS 300 RWD V6-3.0L (3GR-FSE) (2006)
a. Remove the screw and clamp.
b. Remove the radiator unit.
9. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
a. Remove the 5 screws.
b. Release the 3 claws and remove the air duct case.
c. Remove the cooler evaporator from the heater case.
d. Remove the 2 O-rings from the cooler evaporator.
REASSEMBLY
1. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
a. Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the cooler evaporator.
Compressor oil: ND-OIL or equivalent