GS 300 RWD V6-3.0L (3GR-FSE) (2006)
Cigarette Lighter: Service and Repair
CIGARETTE LIGHTER ASSEMBLY
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
3. REMOVE CONSOLE UPPER PANEL ASSEMBLY
4. REMOVE CIGARETTE LIGHTER ASSEMBLY
a. Rotate the socket body in the direction indicated by the arrow mark, and remove the socket body from the cigarette lighter.
b. Rotate the ring nut in the direction indicated by the arrow mark, and remove the cigarette lighter from the console panel.
INSTALLATION
1. INSTALL CIGARETTE LIGHTER ASSEMBLY
a. Rotate the ring nut in the direction indicated by the arrow mark and install the cigarette lighter to the console panel.