GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-2057002.png)
and RH are collectively referred to as the airbag sensors.
HANDLING PRECAUTIONS FOR AIRBAG SENSORS
a. Before starting the given operations, wait for at least 90 seconds after disconnecting the negative (-) terminal cable from the battery:
1. Replacement of the airbag sensors.
2. Adjustment of the front/rear doors of the vehicle equipped with the side airbag and curtain shield airbag (fitting adjustment).
b. When connecting or disconnecting the airbag sensor connectors, ensure that each sensor is installed in the vehicle.
c. Do not use the airbag sensors which has been dropped during the operation or transportation.
d. Do not disassemble the airbag sensors.
