GS 300 RWD V6-3.0L (3GR-FSE) (2006)
Parts Identification Method
Countermeasure became effective from "54A" for supply parts. Countermeasure parts can be identified by a parts packing date identification code, as
shown below.
Repair Procedure
NOTE:
^
When disconnecting the battery, refer to TSIB No. PD020-05, "Power System Initialization During PDS", to ensure that all systems requiring
initialization have been completed properly.
^
When disconnecting the room lamp wiring connector, do NOT pull on the wire. Pull on the connector only.
1.
Disconnect the cable from the negative (-) battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner
activation.