GS 300 RWD V6-3.0L (3GR-FSE) (2006)
License Plate Lamp: Service and Repair
REMOVAL
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed below are for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE LUGGAGE COMPARTMENT DOOR COVER
3. REMOVE LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE
4. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY
a. Disconnect the connector.
b. Remove the 2 screws and switch from the luggage compartment door.
5. REMOVE LICENSE PLATE LIGHT ASSEMBLY
a. Disconnect the connector.
b. Remove the 2 screws and license plate light from luggage compartment door.
6. REMOVE BACK DOOR GARNISH RETAINER SUBASSEMBLY